Step-by-step guide for USB outlet installation

Last Updated: Feb 27, 2024 by

In today’s digital age, it seems like we can never have enough outlets to charge all of our devices. That’s where USB outlets come in handy. These outlets have built-in USB ports, allowing you to charge your devices without needing an adapter. If you’re looking to upgrade your outlets to include USB ports, follow this step-by-step guide for USB outlet installation.

Gather Materials

Before you begin, make sure you have all the necessary materials. You will need a USB outlet, a screwdriver, a voltage tester, and wire cutters. You may also need a wire stripper and electrical tape if your outlet does not come with pre-stripped wires.

Turn Off Power

Safety should always be your top priority when working with electricity. Before you begin, turn off the power to the outlet you will be replacing. You can do this by flipping the corresponding circuit breaker in your electrical panel.

Remove Old Outlet

Using a screwdriver, remove the screws holding the old outlet in place. Carefully pull the outlet out of the wall, being careful not to touch any wires. Use a voltage tester to ensure that there is no electricity running to the outlet.

Prepare Wires

Once you have confirmed that there is no electricity running to the outlet, you can begin preparing the wires. If your outlet does not come with pre-stripped wires, use a wire stripper to remove the insulation from the ends of the wires. Twist the exposed wires to ensure they are tightly bound.

Connect Wires

Next, you will need to connect the wires to the new USB outlet. The outlet should have two black wires and two white wires. Connect the black wires to the brass screws and the white wires to the silver screws. If your outlet has a green grounding wire, connect it to the green screw on the outlet.

Secure Outlet

Once the wires are connected, carefully push the outlet back into the wall. Use the screws provided with the outlet to secure it in place.

Test Outlet

Before turning the power back on, use a voltage tester to ensure that the outlet is wired correctly. If the tester indicates that there is electricity running to the outlet, double-check your connections and make any necessary adjustments.

Turn Power Back On

If the outlet is wired correctly, you can turn the power back on. Test the USB ports by plugging in a device and ensuring that it charges properly.

Enjoy Your New USB Outlet

Congratulations, you have successfully installed a USB outlet! Now you can enjoy the convenience of charging your devices without needing an adapter.

Have you installed a USB outlet before? Do you have any tips or tricks to share? Let us know in the comments.

Gulrukh Ch

About the Author: Gulrukh Ch

Gulrukh Chaudhary, an accomplished digital marketer and technology writer with a passion for exploring the frontiers of innovation. Armed with a Master's degree in Information Technology, Gulrukh seamlessly blends her technical prowess with her creative flair, resulting in captivating insights into the world of emerging technologies. Discover more about her on her LinkedIn profile.