If you have recently purchased an iMac, you may be wondering how to connect your Magic Mouse to it using only your keyboard. This can be a bit tricky, but with the right steps, you can easily connect your Magic Mouse to your iMac without the need for an external mouse. In this article, we will guide you through the process of connecting your Magic Mouse to your iMac using only your keyboard.
Step 1: Turn on your iMac
The first step is to turn on your iMac. You can do this by pressing the power button located on the back of your iMac. Once your iMac is turned on, you will see the login screen.
Step 2: Press Command + F5
To enable VoiceOver, which will allow you to navigate your iMac using only your keyboard, press Command + F5. This will turn on VoiceOver and you will hear a voice prompt saying “VoiceOver on.”
Step 3: Navigate to System Preferences
Using the arrow keys on your keyboard, navigate to the Apple menu located in the top left corner of your screen. Then, use the arrow keys to navigate to “System Preferences” and press Enter.
Step 4: Navigate to Bluetooth
In the System Preferences menu, use the arrow keys to navigate to “Bluetooth” and press Enter. This will open the Bluetooth settings on your iMac.
Step 5: Turn on Bluetooth
In the Bluetooth settings, use the arrow keys to navigate to the “Turn Bluetooth On” button and press Enter. This will turn on Bluetooth on your iMac.
Step 6: Put your Magic Mouse in pairing mode
To put your Magic Mouse in pairing mode, press and hold the power button on the bottom of the mouse until the green light starts flashing. This indicates that the mouse is in pairing mode.
Step 7: Pair your Magic Mouse
Using the arrow keys, navigate to the “Pair” button in the Bluetooth settings and press Enter. Your iMac will start searching for available devices. Once your Magic Mouse appears in the list, use the arrow keys to select it and press Enter. Your Magic Mouse will now be paired with your iMac.
Step 8: Turn off VoiceOver
To turn off VoiceOver, press Command + F5 again. This will turn off VoiceOver and you can now use your Magic Mouse to navigate your iMac.
Congratulations, you have successfully connected your Magic Mouse to your iMac using only your keyboard. Now you can enjoy the convenience of using your Magic Mouse without the need for an external mouse.
Additional Tips
- If you are having trouble navigating with VoiceOver, you can press the Escape key to exit VoiceOver mode.
- If your Magic Mouse is not appearing in the Bluetooth settings, make sure it is turned on and in pairing mode.
- You can also connect other accessories, such as a keyboard or trackpad, using the same steps.
We hope this article has helped you connect your Magic Mouse to your iMac using only your keyboard. For more tips and tricks on iMac setup and accessories, be sure to check out our other articles. Happy computing!
