How to Fix Sticky Keys of Laptop on the Mechanical Keyboard? in 2022

You may have sticky keys on your mechanical keyboard due to external factors. It is not often, but it does happen. This is possible, especially if you don’t know what’s going on around your favorite mechanical keyboard. A variety of factors can cause a sticky key on a keyboard. Fixing sticky keys can be a scary task.

Keyboards with mechanical switches are fantastic! They are not more complicated than traditional keyboards. While they’re less likely to fail, all those different components mean you’re more likely to have problems with Specific switches: one for each key, depending on the size of the keyboard.

If a single key on your keyboard refuses to register or repeats when pressed, you have a few options for resolving the issue before replacing the entire keyboard. This essay refers to sticky keys as keys that become stuck due to debris and dust. A variety of factors can cause them. It can be incredibly irritating to type on a sticky keyboard. You make mistakes, can’t type passwords, and some become stuck to the point that you can’t push them at all.

Cleaning your keyboard is an essential aspect of keeping your computer and laptop in good working order. If you don’t, dirt will accumulate, and your keys will get stuck. Similarly, spilled soda on a laptop keyboard causes sticky keys if you drink while working. Many people recommend removing all the keys from a mechanical keyboard to clean it. However, there are other options.

Because it can be detached from the USB connector, a mechanical desktop computer keyboard is easy to clean. We can handle and move a mechanical USB keyboard more easily when unplugged, which is not the case with a laptop or MAC. Cleaning a laptop keyboard is a little more complicated, so we’ve included instructions below.

How to Fix Sticky Keyboards?

The keys that become stuck due to the dirt can make it incredibly difficult to type correctly. If you come across any of these keys, it’s a good idea to look into the best ways to clean up the muck and remove the dirt or dust. One of the main explanations may be that you accidentally spilled something on the keyboard. If you want to eat and surf simultaneously, your keys will almost certainly get stuck. Before we can figure out how to fix sticky keys on a mechanical keyboard, we must first figure out what causes a stuck key on a mechanical keyboard.

The following are some of the scenarios that can cause a sticky key on a mechanical keyboard:

Debris from the Environment:

Dust and filth abound in the atmosphere around your workstation. You will not notice any problems until you encounter a stuck mechanical keyboard key. A sticky key can be caused by dust particles accumulating inside the switches, causing symptoms such as sticky or repetitive keystrokes.

Drinks and food scraps:  We like to eat and drink at work. Some keys may get sticky because of the accumulation of food particles and liquid spills on the keyboard. On a mechanical keyboard, keeping a safe distance between the keyboard and your food can help you avoid sticky keys.

Drinks and food scraps on keyboard

You can address a sticky key on a mechanical keyboard or any other type of keyboard in various ways, depending on the amount of the keyboard’s stickiness.

Read also: How to Remove Keys From Keyboard?

Shake the Keyboard:

Unplug the keyboard and give it a good shake. Make sure to turn the keyboard over and shake it gently to avoid damage. Brush off any garbage that has accumulated on the keyboard. The shaking is best to be at an angle to the floor. Shake vigorously to allow debris and dirt to fall to the floor.

Blow Out the Switch Using Canned Air:

The presence of dust or dirt on the switch itself can be one of the major causes of sticky keys on a mechanical keyboard. This is rare, but it does happen: moving a standard mechanical switch up and down can cause tiny particles to enter the inside of the switch. This may jam the slider or spring mechanism. It may be rare to move a mechanical switch up and down to swallow leftover food or other switch components.

Compressed or bottled air might be a good alternative for removing any muck that has clogged the activator on the keyboard. Using compressed air to clear out whatever crud is blocking the activation point is a less invasive option. If that doesn’t work, you’ll have to resort to more complicated ways, such as disassembling or removing the switch entirely, which may be out of your reach if you lack the necessary tools or abilities.

clean keyboard of laptop

Depress the key switch midway between the bottom and top positions using the applicator straw or your finger, but not all the way. Remove the keycap from the affected key, then hold the keyboard vertically, parallel to the ground, and perpendicular to the compressed air. Straighten the can, up and down to avoid spilling the liquid accelerator. Gently press the key switch and blow with compressed air for a second or two.

Resist the desire to keep the air going for longer

If whatever bit of junk is in there isn’t dislodged right away, it’s not going to come out with additional pressure, and you’ll need to give the compressed air can time to resettle so the accelerant doesn’t come out. Return the keyboard to its original position and reattach the keycap to the switch. On your PC, check the results. If the problem persists, repeat the process once or twice more.

If this does not work, you need to take more serious action. Remove the key and clean the dirt on the switch. If the above process fails, you will have to resort to more complicated methods. It entails either wholly or partially disconnecting the switch. This is one of the most difficult ways to fix sticky keys on a mechanical keyboard. Of course, if you don’t have the tools you need, this may not be the best choice.

Remove the damaged keys and keep the keyboard upright. Make sure that the keyboard is parallel to the compressed air and perpendicular to the floor. While pressing the rocker switch, use compressed air to blow off the dust on the keyboard or switch.

Hold the can upright and straight so that the liquid does not spill out and further harm the keyboard mechanism. Blow out compressed air for a few seconds while pressing the switch button. The muck should come out of the switch right away. If it does not come out immediately, it is best not to blow air again.

Remove the Switch:

This strategy is used if you have the appropriate information and tools to complete the assignment. Your keyboard’s switch is made up of a plastic box, a spring, a slider, and an electric switch. The switches on some keyboards are located on a PCB, whereas others are fixed on a plate. It can be exceedingly tough to remove and clean them up. It can be time-consuming, complicated, and inconvenient. Doing so may damage the switch or keyboard.

In your operating system, change the repeating key rate. If your key keeps repeating itself, you might be able to solve the problem without making any physical changes. Your operating system’s rate should repeated keystrokes are accepted should be changed. The OS-wide keyboard settings menu in Windows allows you to modify this. Double-click the Keyboard icon in the Control Panel.

Take a look at the Repeat Delay setting on the Speed ​​tab. When a key is depressed, the OS waits for a certain period before activating the key again. Move the value closer to “long. If your problem is small, this should solve it. Click OK to apply the settings. The same settings can be found in the keyboard area of ​​the macOS System Preferences menu (the gear icon in the Dock). It is in settings and gt. And gt device configuration; keyboard settings in Chrome OS.

Read also: How to add Chinese keyboard to Mac?

Dismantle the Switch:

Keep in mind that each switch on your keyboard is a self-contained unit consisting of a little plastic box containing a spring, a slider, and an electric switch. It’s feasible to pop the top of certain keyboards—those with switches mounted to the PCB rather than a “plate”—remove the slider and the spring and manually wipe out the plastic housing and the switch. This is tricky and time-consuming. Frankly speaking, the switch will most likely fail, and your keyboard will also fail. It doesn’t even work on your keyboard (Google it to see if your keyboard is on the PCB or on the PCB).

However, if it is lost and your only option is to replace the keyboard, it may be worth a try. You need a slender tool to push the latch, and something small and slightly pointed to open the case. In the first case, a small pair of pliers or tweezers is sufficient, in the second case, a small flat-blade screwdriver or a knife with a very thin blade. Cleaning supplies include compressed air, cloth, and rubbing alcohol.

Now you must determine whether your switches are located on the PCB or the plate. Keep in mind that switches that aren’t built in the typical Cherry MX design may be different. The keyboard must be completely dismantled to access any of the various stem and spring components on a Topre switch keyboard. If the top of the housing falls off, be careful because spring pressure will push the housing and shaft upward and outward. The top, the stem, and the spring should now be three separate parts.

You can still see the keyboard connector at the bottom of the case. A can of compressed air, lid, and isopropanol can be used to thoroughly clean the switch housing. Use a soft touch. Place the spring back into the housing (around the hole in the center) after the alcohol has evaporated, then lower the stem onto the spring and the housing onto the branch. If you’re confused about the setting, look at the other switches on your keyboard. Put on the keycap again and run the computer test of the key.

Replacing the sticky keys on a mechanical keyboard

If none of these methods work or solve the problem, it may be necessary to resort to the most extreme and last resort.

Mechanical keyboards are designed so that most of the parts, including the switches, may be returned. So, if nothing else seems to be working, replace the switches. You can do it yourself if you know what you’re doing, or you can hire an expert to do it for you.

Of course, you’ll need to know how to solder and desolder electronic components, as well as a new switch that works with your keyboard. When replacing a switch on your keyboard, look for one made by the same company and belonging to the same keyboard series.

Read also: How to Turn on Backlit Keyboard of Lenovo Laptop?


If you don’t handle your keyboard carefully enough, the sticky keys on a mechanical keyboard might become a significant source of concern. While the mechanical keyboard has been one of the greatest when it comes to typing comfort and offers a variety of benefits, keeping it clean at all times can be an excellent alternative.

The information provided here on how to fix sticky keys on a mechanical keyboard should assist you in completing the operation more quickly. Just make sure you’re following the proper procedures for repairing sticky keys on a mechanical keyboard. We wouldn’t advocate following the tech-savvy guidelines unless you have the necessary technical skills or resources.


How can you get rid of squeaky keys?

Press the shift key five times to turn off Sticky Keys, or uncheck the Turn On Sticky Keys boxes in the Ease of Access control panel. Pressing two keys at the same time turns off Sticky Keys if the default choices are selected.

What is the best way to clean a clogged mechanical keyboard switch?

To remove all keys, please use key extractor. Fill a container with warm water (do not use hot water) and dentures (dishwashing liquid is also good). Fill the container half full with water, and then soak the keys for at least 56 hours. Clean the buttons by flushing and cleaning.

What is the best way to clean sticky keys without removing them?

Some computer manufacturers recommend using a moist microfiber cloth to clean the keys, while others use cotton swabs bathed in isopropyl alcohol, popularly known as rubbing alcohol.  Cleaning keys with mild soap and water is also advised.

Is it possible to disable Sticky Keys?

The Sticky Keys dialogue occurs after a tone. The cursor is currently on the Yes button by default. To activate the sticky keys, press the space bar. Press 3 or more modifier keys (Shift, Ctrl, Alt, Function, Windows Key) at the same time to turn off Sticky Keys once they’ve been enabled.


male avatar
Clare D. McCoy

Computer Engineer by training, writer and hardware analyst at Geeknetic since 2011. I love to gut everything that passes through my hands, especially the latest hardware that we receive here to review. In my free time I mess around with 3d printers, drones and other junk. For anything here I am.

Scroll to Top